2N LTE Verso, Руководство по настройке

Страница: 166 / 224

2N® LTE Verso Configuration Manual
166 / 224
•
•
•
•
•
Subject – set the e-mail subject to be sent.
E-Mail Body – edit the text to be sent. Use the HTML formatting marks in the text. You can
insert special symbols substituting the username, date & time and device ID. These
symbols will be replaced with the actual value before sending.
The list of placeholders
included in the template is shown in a table at the end of the section.
If the placeholder value is not found in the string, the value is used directly.
Attach Camera Snapshots – enable sending of an attachment including one or more
camera snapshots taken during ringing or calling.
Count of Snapshots to Be Attached – set the count of snapshots to be attached to the e-
mail message.
Snapshot Resolution – set the snapshot resolution for the images to be sent.
E-Mail Body
<p>Hello,
</p>
<p>Tamper
switch of device <b>$DeviceName$</b> (IP: <b>$Ip4Address$</b>) was
activated on <b>$DateTime$</b>
</p>
<p>This e-mail message is generated automatically by device: <b>$DeviceName$</b>. Do
not reply to
this message.
</p>
•
Caution
If the placeholder value is not found in the string, the value is used directly.

•
Caution
The $DeviceName$ placeholder name is directly linked to the value of the Device
name parameter in
Services / Web Server / Basic Settings . We recommed that you
use a name that defines the device uniquely.
