2N LTE Verso, Руководство по настройке

Страница: 61 / 224

2N® LTE Verso Configuration Manual
61 / 224
•
•
request) and must be as follows: http://ip_address/path . E.g.: http://192.168.1.50/
relay1=off
Username – enter the username for the external device (WEB relay, e.g.) authentication.
The parameter is obligatory only if the external device requires authentication.
Password – enter the external device (WEB relay, e.g.) authentication password. The
parameter is obligatory only if the external device requires authentication.
•
Note
The HTTP command sending is available with the Gold or Enhanced Integration
licence only.

Tip
The HTTP commands do not add URL encoding. If, e.g., you enter http://10.27.24.6/
message.cgi?action=9%3A%2F , the following is sent: http://10.27.24.6/message.cgi?
action=9%3A%2F .
To include URL encoding, enter, e.g.: http://10.27.24.6/message.cgi?
action=9%253A%252F and the following is sent: http://10.27.24.6/message.cgi?
action=9%253A%252F .

Tip
With an external relay, Part No. 9137410E , the following HTTP commands are used:
To turn on the switch – http://ip_address/state.xml?relayState=1 (e.g.: http://
192.168.1.10/state.xml?relayState=1 )
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address/state.xml?
relayState=2 (e.g.: http://192.168.1.10/state.xml?relayState=2 )
To turn off - http://ip_address/state.xml?relayState=0 (e.g.: http://192.168.1.10/
state.xml?relayState=0 )
With an external relay, Part No. 9137411E , the following HTTP commands are used
(replace the X symbol with the relay number):
To turn on the switch – http://ip_address/state.xml?relayXState=1 (e.g.: http://
192.168.1.10/state.xml?relay1State=1 )
To turn on for pre-defined time (default value is 1.5 s) – http://ip_address/state.xml?
relayXState=2 (e.g.: http://192.168.1.10/state.xml?relay1State=2 )
To turn off - http://ip_address/state.xml?relayXState=0 (e.g.: http://192.168.1.10/
state.xml?relay1State=0 )
