2N LTE Verso, Руководство по настройке

Страница: 112 / 224

2N® LTE Verso Configuration Manual
112 / 224
•
•
•
•
Backup Registrar Port
*
– set the backup SIP registrar port. The device uses the default
port according to the transport layer (5060 or 5061) or a port obtained from DNS in case
the parameter is empty or set to 0.
Registration expires – define the registration expiry, which affects the network and SIP
Registrar load by periodically sent registration requirements. The SIP Registrar can modify
the expiry limit without letting you know.
Registration state – display the current registration state (unregistered, registering...,
registered, unregistering...).
Failure reason – display the reason for the last registration attempt failure: the last error
reply of the registrar, e.g. 404 Not Found.
•
Tip
To set the Outbound Proxy complete the Outbound Proxy address into the Proxy
address and Registrar address parameters. Domain = Registrar address.

•
Caution
If the parameter
*
is empty or set to 0, the default port is used according to the
selected transport protocol (5060 for TCP or UDP, 5061 for TLS).
