2N LTE Verso, Руководство по настройке

Страница: 125 / 224

2N® LTE Verso Configuration Manual
125 / 224
•
•
•
•
5.4.1.1 Dial Cycles Limit
This parameter sets the maximum number of consecutive calls to a calling destination when
there is a dialing cycle of deputies (the simplest example of a dialing cycle is when a user has
configured itself as a deputy, another example is two users who are configured to be deputies of
each other).
Example 1
The algorithm first resolves the branches independently of each other. There are users Alice and
Carol configured to one button in the example below (by pressing the button two parallel calls
are initiated together). The Dial Cycles Limit is set to 2. Alice has two phone numbers (calling
destinations), the other users have only one calling destination. The deputies are configured as
follows:
Alice is the deputy of Bob
Bob is the deputy of Alice
Carol is the deputy of Dave
Dave is the deputy of Carol
The resulting calling scheme looks like this (in case no one picks up or rejects the call):