2N 9153201-E Скачать руководство пользователя страница 62

Страница: 62 / 63

The consumer shall, without delay, change the access password for the product after

installation. The manufacturer shall not be held liable or responsible for any damage

incurred by the consumer in connection with the use of the original password.

The manufacturer also assumes no responsibility for additional costs incurred by the

consumer as a result of making calls using a line with an increased tariff.

Electric Waste and Used Battery Pack Handling

Do not place used electric devices and battery packs into municipal waste containers.

An undue disposal thereof might impair the environment!

Deliver your expired electric appliances and battery packs removed from them to

dedicated dumpsites or containers or give them back to the dealer or manufacturer

for environmental-friendly disposal. The dealer or manufacturer shall take the product

back free of charge and without requiring another purchase. Make sure that the

devices to be disposed of are complete.

Do not throw battery packs into fire. Battery packs may not be taken into parts or

short-circuited either.

CIE-Group Ltd, www.cie-group.com 62 / 63

Содержание 9153201-E
































































Результаты поиска

Содержание 9153201-E

Отзывы:

Похожие инструкции для 9153201-E

Бренды по названию

Популярные бренды

2N 9153201-E, Руководство по установке

Результаты поиска

Содержание 9153201-E

Отзывы:

Похожие инструкции для 9153201-E

Бренды по названию

Популярные бренды