2N 9153201-E, Руководство по установке

Страница: 15 / 63

1.
2.
3.
4.
5.
Caution
The warranty does not apply to the product defects and failures arisen
as a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damage caused by theft within an area
that is accessible after the attached electric lock is switched. The
product is not designed as a burglar protection device except when
used in combination with a standard lock, which has the security
function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the intercom circuits are under
continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer's warranty shall be void for products
damaged in this way!
Flush Mounting – Classic Bricks
(including hollow bricks, thermally insulated walls, etc.)
What you need:
A properly cut hole
Plaster, mounting glue, mounting foam or mortar as necessary
Cut a wall hole using the template enclosed. Make sure that all the required
cables are available in the hole.
Unpack the plastic mounting box. Break out the cable holes as necessary and
make sure that the wall hole is big enough for the box.
Wall up the mounting box making sure that the box is aligned with the wall
surface. Wait until the plaster (mortar, mounting foam, etc.) sets.
Unscrew the front panel from the door intercom.
Connect the cables to the terminals or RJ connector as described in the Electric
subsection. Connection
CIE-Group Ltd, www.cie-group.com 15 / 63