2N 9153201-E, Руководство по установке

Страница: 19 / 63

1.
2.
3.
4.
5.
6.
7.
Wall Mounting
Use the wall (surface) mounting box, part No. , and follow the instructions 9153003
enclosed.
(concrete and steel structures, entry barrier columns, etc.)
What you need:
Wall mounting box
Part No. 9153003
Mounting instructions:
a) If the cable wall outlets are located directly under the intercom to be installed,
move the cap from the middle hole to the bottom one to make way for the
cables. Make sure that no water can get into the intercom through the middle
hole! The best solution is to seal the hole perfectly with silicone, for example.
b) If the cables lead along the wall below the intercom level, put the template to
the wall in its normal position – the bushing will be on the bottom side.
c) If the cables lead along the wall above the intercom level, put the template to
the wall reversely – the bushing will be on the upper side.
Use an 8 mm drill to drill two holes of the minimum depth of 50 mm with the aid
of the template.
Push the dowels into the holes and attach the box and screws. Perfect the box
position using the oval holes before tightening the screws completely.
Connect the cables to the intercom as instructed.
Mount the intercom without the front panel to the box using the M4 screws
included in the delivery.
Screw the front panel onto the intercom.
Tighten the cable bushing properly to fix the cables especially where the bushing
is on the upper box side to avoid water leakage!
CIE-Group Ltd, www.cie-group.com 19 / 63