2N 9153201-E Скачать руководство пользователя

Страница: 27 / 63

3.1 Programming

ll the intercom parameters, including the keypad ones, are set remotely using any tone-

dialling telephone set (or a mobile phone). First call the intercom and enter the

programming mode. The access to this mode is service password protected.

A voice menu is available in the programming mode and so you need not use this

manual to program standard parameters. The menu is stored in the intercom memory

in the default language. Having entered the full parameter or memory number, you

can hear how the parameter has been programmed, thus checking the programmed

numbers for correctness.

All parameters are stored safely in the non-volatile EEPROM memory.

Tip

Write or print the values to be programmed to minimise the risk of error.
Moreover, this gives you an idea of what you have programmed. Make
sure that programming is not barred (JP1 jumper) – refer to the PCB
Description subsection.

Entering Programming Mode

You can enter the programming mode only during an

call (telephone –

incoming

intercom call). The programming barring jumper must not be mounted. To get into the

programming mode, enter the

in the format

(do

service password

password

not forget to enter the asterisks before and behind the password!). The service

password is 12345 by default and can be changed. If you enter the password correctly,

the voice menu is launched. Now you can start programming.

Programming Procedure

You can set parameters in any order and as many times as you wish. To change a

parameter use the following command:

Parameter number

parameter value

A three-digit

is assigned to every parameter to be programmed

parameter number

and to every memory (refer to the Programming Chart). This number indicates to the

intercom which parameter to change, and

is used as "Enter". When it is entered,

the intercom repeats the parameter (or memory) number and reads the current

CIE-Group Ltd, www.cie-group.com 27 / 63

Содержание 9153201-E
































































Результаты поиска

Содержание 9153201-E

Отзывы:

Похожие инструкции для 9153201-E

Бренды по названию

Популярные бренды

2N 9153201-E, Руководство по установке

Результаты поиска

Содержание 9153201-E

Отзывы:

Похожие инструкции для 9153201-E

Бренды по названию

Популярные бренды