Model 106-H Ozone Monitor Manual Rev. D-2
8
3.4
Accessing the Main, Zero, and Admin Menus
When first turned on, the instrument will first display the serial number and then start
making measurements. As described in Section 3.2.1, allow a ~20-minute warmup
period.
The Main Menu is accessed using the black Select switch on the front panel of the
instrument. To reach the Main Menu, press and
hold in
the Select switch until
Menu
is displayed, then release the Select switch. After a few seconds the Main Menu will
appear:
Menu
Zero Admin
where
Zero
and
Admin
are submenus that may be selected. A blinking cursor will
show across the
Z
of the
Zero
submenu. The Select button may be rotated clockwise
or counterclockwise to move the cursor under the first letter of another submenu. To
select a particular submenu, move the cursor under the first letter of a submenu and
momentarily press (“click”) the Select button. To exit the Main Menu and begin
making measurements again, select and click on the left arrow (
).
Rotate the Select switch until the cursor is under
the “A” in “Admin.” Press the Select
switch to enter the
Admin Menu
:
Admin Menu
Dat Avg Cfg Lmp
where
Dat
,
Avg
,
Cfg
and
Lmp
are submenus that may be selected. A blinking cursor
will show across the
D
of the
Dat
submenu. The Select switch may be rotated
clockwise or counterclockwise to move the cursor under the first letter of one of the
other submenus. M
omentarily press (“click”) the Select switch to select a submenu.
To exit the
Admin Menu
and go back to the
Main Menu
, select and click on the left
arrow (
). To enter the
Zero Menu
, select and click on it. Exit the Zero Menu by
selecting and clicking on the left arrow (
).
To exit the Main Menu and resume measurements, select and click on the left arrow
(
).
Refer to Figure 3.1 in Section 3.3 for the various menu functions described in Sections
3.5 through 3.20 below.
3.5
Making Measurements without Averaging or Logging
Access the
Admin Menu
as described in Section 3.4. Select the
Dat
submenu from
the
Admin Menu
by rotating and then clicking the Select switch. The display will now
show:
