ZyXEL Communications WAP6906 User Manual Download

Page: 46 / 99

Chapter 7 Network

WAP6906 User’s Guide

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address.

Gateway IP

Enter a gateway IPv4 address (if your ISP or network administrator gave you one) in this field.

IPv6

Select

DHCP

to obtain an IPv6 address using IPv6 stateful autoconfiguration.

Select

SLAAC(StateLess Address Auto-Configuration)

to obtain an IPv6 address using IPv6

stateless autoconfiguration.

Select

Static

to configure a fixed IPv6 address for the WAP6906.

WAN IPv6 Address

Enter an IPv6 IP address that your ISP gave to you for the WAN interface.

Prefix Length

Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.

IPv6 Gateway

Enter the IP address of the next-hop gateway. The gateway is a router or switch on the same
segment as your WAP6906's interface(s). The gateway helps forward packets to their
destinations.

Apply

Click

Apply

to save your changes back to the WAP6906.

Reset

Click

Reset

to begin configuring this screen afresh.

Table 12 Network > Networking (continued)

LABEL

DESCRIPTION

Summary of Contents for WAP6906




































































































Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands

ZyXEL Communications WAP6906, User Manual

Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands