ZyXEL Communications WAP6906 User Manual Download

Page: 28 / 99

WAP6906 User’s Guide

Figure 11

Navigation Panel Menu

The following table describes the sub-menus.

Table 7 Navigation Panel

LINK

TAB

FUNCTION

Status

This screen shows the WAP6906’s general device, system status information.

MONITOR

Monitor

Log

View Log

Use this screen to view the list of activities recorded by your WAP6906.

Wireless

Monitor

Wireless
Monitor

Use this screen to view the wireless summary currently associated to the
WAP6906.

MBSS Monitor

Use this screen to view a summary of the Multiple Basic Server Sets (MBSS)
available on the WAP6906. The MBSS allows you to use one access point to
provide several Basic Serve Sets (BSS) simultaneously.

Multicast

Monitor

Multicast
Monitor

Use this screen to view the multicast group information.

CONFIGURATION

Networking

Network

Networking

Use this screen to configure the WAP6906’s LAN IPv4 and IPv6 addresses.

Wireless

Network 5G

Basic

Use this screen to configure general wireless LAN settings.

WPS

Use this screen to enable and configure WPS on your WAP6906.

MAC Filter

Use this screen to configure the WAP6906 to block access to devices or block
the devices from accessing the WAP6906.

MBSS

Use this screen to configure multiple BSSs on the WAP6906.

Connection

Station

Use this screen to enter the SSID and configure the wireless security between
the WAP6906 and the wireless network to which you want to connect.

AP List

Use this screen to scan the wireless networks in the WAP6906’s area.

WPS

Use this screen to quickly set up a wireless network with strong security
between your WAP6906 and the AP.

Wireless

Network 2.4G

Basic

Use this screen to configure general wireless LAN settings.

Advanced

Use this screen to configure advanced wireless settings.

WPS

Use this screen to enable and configure WPS on your WAP6906.

MAC Filter

Use this screen to configure the WAP6906 to block access to devices or block
the devices from accessing the WAP6906.

MBSS

Use this screen to configure multiple BSSs on the WAP6906.

MAINTENANCE

Password

Password
Setup

Use this screen to change the password of your WAP6906.

Time

Time Setup

Use this screen to change your WAP6906’s time and date.

Firmware

Upgrade

Firmware
Upgrade

Use this screen to upload firmware to your WAP6906.

Summary of Contents for WAP6906




































































































Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands

ZyXEL Communications WAP6906, User Manual

Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands