Appendix C Legal Information
WAP6906 User’s Guide
90
Industry Canada RSS-GEN & RSS-247 Statement
• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
• This radio transmitter (2468C-WAP6906) has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Antenna Information
If the product with 5G wireless function operating in 5150-5250 MHz and 5725-5850 MHz, the following attention must be paid,
• The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the
equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
• The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) of RSS 247
shall be clearly indicated.
If the product with 5G wireless function operating in 5250-5350 MHz and 5470-5725 MHz, the following attention must be paid.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies with the e.i.r.p. limit.
• Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
• Le présent émetteur radio (2468C-WAP6906) de modèle s'il fait partie du matériel de catégorieI) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits
pour l'exploitation de l'émetteur.
TYPE
MANUFACTURER
GAIN
CONNECTOR
5G D-B ANT_0
PCB
Aristotle
4.74 (5210 MHz), 3.49 (5290 MHz)
i-pex
5G D-B ANT_1
PCB
Aristotle
4.28 (5210 MHz), 4.02 (5290 MHz)
i-pex
5G D-B ANT_2
PCB
Aristotle
3.59 (5210 MHz), 3.95 (5290 MHz)
i-pex
5G D-B ANT_3
PCB
Aristotle
2.47 (5210 MHz), 2.28 (5290 MHz)
i-pex
5G M-B ANT_0
PCB
Aristotle
4.38 (5530 MHz), 5.09 (5610 MHz)
4.63 (5690 MHz), 3.46 (5775 MHz)
i-pex
5G M-B ANT_1
PCB
Aristotle
3.16 (5530 MHz), 2.82 (5610 MHz)
3.15 (5690 MHz), 2.5 (5775 MHz)
i-pex
5G M-B ANT_2
PCB
Aristotle
3.65 (5530 MHz), 3.99 (5610 MHz)
3.44 (5690 MHz), 3.77 (5775 MHz)
i-pex
5G M-B ANT_3
PCB
Aristotle
1.28 (5530 MHz), 5.79 (5610 MHz)
5.6 (5690 MHz), 6.58 (5775 MHz)
i-pex
2.4G ANT_0
PCB
Aristotle
1.85 (2437 HMz)
i-pex
2.4G ANT_1
PCB
Aristotle
3.45 (2437 HMz)
i-pex
