ZyXEL Communications WAP6906 User Manual Download

Page: 96 / 99

Appendix C Legal Information

WAP6906 User’s Guide

and will be solely at the discretion of Zyxel. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by

an act of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties,

express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. Zyxel shall in no event be held

liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the

device at http://www.zyxel.com/web/support_warranty_info.php.

Registration

Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at

www.us.zyxel.com for North American products.

Open Source Licenses

This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided

with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under those Licenses,

please contact [email protected] to get it.

Summary of Contents for WAP6906




































































































Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands

ZyXEL Communications WAP6906, User Manual

Search results

Summary of Contents for WAP6906

Reviews:

Related manuals for WAP6906

Brands by name

Popular brands