manualshive.com logo in svg

ZyXEL Communications VMG1312-B10C, User Manual

Share
Download
ZyXEL Communications VMG1312-B10C User Manual Download Page 55

 Chapter 5 Broadband

VMG1312-B10C User’s Guide

55

5.4  The Advanced Screen

Use the 

Advanced

 screen to enable or disable PTM over ADSL, Annex M, and DSL PhyR functions. 

The Device supports the PhyR retransmission scheme. PhyR is a retransmission scheme designed to 
provide protection against noise on the DSL line. It improves voice, video and data transmission 
resilience by utilizing a retransmission buffer.

Click 

Network Setting > Broadband

 > 

Advanced

 to display the following screen.

Figure 23   

Network Setting

 > 

Broadband > Advanced 

The following table describes the labels in this screen. 

Apply

Click 

Apply

 to save your changes back to the Device.

Cancel

Click 

Cancel

 to return to the previous configuration.

Table 10   

Network Setting

 > 

Broadband > 3G Backup (continued)

LABEL

DESCRIPTION

Table 11   

Network Setting

 > 

Network Setting > Broadband

LABEL

DESCRIPTION

PTM over ADSL

Select

 Enable

 to use PTM over ADSL. Since PTM has less overhead than ATM, some ISPs 

use PTM over ADSL for better performance.

Annex M

You can enable 

Annex M 

for the Device to use double upstream mode to increase the 

maximum upstream transfer rate.

PhyR US

Enable or disable 

PhyR US

 (upstream) for upstream transmission to the WAN. PhyR US 

should be enabled if data being transmitted upstream is sensitive to noise. However, 
enabling PhyR US can decrease the US line rate. Enabling or disabling PhyR will require the 
CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it 
enabled.

PhyR DS

Enable or disable 

PhyR DS

 (downstream) for downstream transmission from the WAN. 

PhyR DS should be enabled if data being transmitted downstream is sensitive to noise. 
However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will 
require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and 
have it enabled.

Apply

Click 

Apply

 to save your changes back to the Device.

Cancel

Click 

Cancel

 to return to the previous configuration.

Summary of Contents for VMG1312-B10C







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands