ZyXEL Communications VMG1312-B10C, User Manual

Page: 151 / 294

Chapter 10 Network Address Translation (NAT)
VMG1312-B10C User’s Guide
151
third ( C in the example). You assign the LAN IP addresses and the ISP assigns the WAN IP address.
The NAT network appears as a single host on the Internet.
Figure 73
Multiple Servers Behind NAT Example
Click Network Setting > NAT > Port Forwarding to open the following screen.
Figure 74
Network Setting > NAT > Port Forwarding
The following table describes the fields in this screen.
Table 53
Network Setting > NAT > Port Forwarding
LABEL DESCRIPTION
Add new rule Click this to add a new rule.
# This is the index number of the entry.
Status This field displays whether the NAT rule is active or not. A yellow bulb signifies that this rule
is active. A gray bulb signifies that this rule is not active.
Service Name This shows the service’s name.
WAN Interface This shows the WAN interface through which the service is forwarded.
WAN IP This field displays the incoming packet’s destination IP address.
Server IP
Address This is the server’s IP address.
Start Port This is the first external port number that identifies a service.
End Port This is the last external port number that identifies a service.
Translation
Start Port This is the first internal port number that identifies a service.
A=192.168.1.33
D=192.168.1.36
C=192.168.1.3
B=192.168.1.34
WAN
LAN
192.168.1.1
IP Address assigned by ISP