manualshive.com logo in svg

ZyXEL Communications VMG1312-B10C, User Manual

Share
Download
ZyXEL Communications VMG1312-B10C User Manual Download Page 177

VMG1312-B10C User’s Guide

177

C

H A P T E R

      1 3

USB Service

13.1  Overview 

The Device has a USB port used to share files via a USB memory stick or a USB hard drive. In the 

USB Service

 screens, you can enable file-sharing server, media server, and printer server.

13.1.1  What You Can Do in this Chapter

• Use  the 

File Sharing

 screen to enable file-sharing server (

Section 13.2 on page 178

). 

• Use  the 

Media Server

 screen to enable or disable the sharing of media files (

Section 13.3 on 

page 180

).

• Use  the 

Printer Server

 screen to enable the print server (

Section 13.4 on page 181

).

13.1.2  What You Need To Know

The following terms and concepts may help as you read this chapter.

13.1.2.1  About File Sharing

Workgroup name

This is the name given to a set of computers that are connected on a network and share resources 
such as a printer or files. Windows automatically assigns the workgroup name when you set up a 
network. 

Shares

When settings are set to default, each USB device connected to the Device is given a folder, called 
a “share”. If a USB hard drive connected to the Device has more than one partition, then each 
partition will be allocated a share. You can also configure a “share” to be a sub-folder or file on the 
USB device.

File Systems

A file system is a way of storing and organizing files on your hard drive and storage device. Often 
different operating systems such as Windows or Linux have different file systems. The file sharing 
feature on your Device supports File Allocation Table (FAT) and FAT32. 

Common Internet File System

The Device uses Common Internet File System (CIFS) protocol for its file sharing functions. CIFS 
compatible computers can access the USB file storage devices connected to the Device. CIFS 

Summary of Contents for VMG1312-B10C







































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands