background image

 

 

VES-1012 Hardware Installation Guide 

ZyXEL Limited Warranty 

 

iii   

ZyXEL Limited Warranty 

ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or 
workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and upon 
proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, 
ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts 
or labor and to whatever extent it shall deem necessary to restore the product or components to proper operating 
condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal 
value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product is modified, 
misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. 

Note 

Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is 
in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a 
particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind 
of character to the purchaser. 

To obtain the services of this warranty, contact ZyXEL's Service Center for your Return Material Authorization 
number (RMA). Products must be returned Postage Prepaid. It is recommended that the unit be insured when 
shipped. Any returned products without proof of purchase or those with an out-dated warranty will be repaired or 
replaced (at the discretion of ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced 
products will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty gives you 
specific legal rights, and you may also have other rights that vary from country to country.

Summary of Contents for VES-1012 -















































Reviews: