ZyXEL Communications VES-1012 -, Hardware Installation Manual, Page: 27 / 46

VES-1012 Hardware Installation Guide
Hardware Connections 4-1
Chapter 4
Hardware Connections
This chapter shows you how and where to make hardware connections.
Before you make your hardware connections, make sure that your VES-1012 is safely and securely positioned.
4.1 Rear Panel Connections
The power cord is the only connection on the rear panel.
4.1.1 Power Cord
Make sure you are using the correct power source.
The following figure shows the rear panel of the VES-1012.
Figure 4-1 The VES-1012 Rear Panel
Connect the female end of the power cord to the power receptacle on the rear panel of your VES-1012 (just to the
right of the warning sticker) as seen next. Connect the other end of the cord to a power outlet. Make sure that no
objects obstruct the airflow of the fans (located on the side of the unit).
Figure 4-2 Connecting the Power Cord to the VES-1012 and a Power Source