Chapter 5 Quick Setup Wizards
UAG5100 User’s Guide
54
Figure 31
ISP and WAN Connection Settings: (PPTP Shown)
The following table describes the labels in this screen.
Table 10
ISP and WAN Connection Settings
LABEL
DESCRIPTION
ISP Parameter
This section appears if the interface uses a PPPoE or PPTP Internet connection.
Encapsulation
This displays the type of Internet connection you are configuring.
Authentication
Type
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your UAG accepts either CHAP or PAP when requested by this remote
node.
CHAP - Your UAG accepts CHAP only.
PAP - Your UAG accepts PAP only.
MSCHAP - Your UAG accepts MSCHAP only.
MSCHAP-V2 - Your UAG accepts MSCHAP-V2 only.
User Name
Type the user name given to you by your ISP. You can use alphanumeric and -_
@$./
characters, and it can be up to 31 characters long.
Password
Type the password associated with the user name above. Use up to 64 ASCII characters
except the [] and ?. This field can be blank.
Retype
to
Confirm
Type your password again for confirmation.
Nailed-Up Select
Nailed-Up if you do not want the connection to time out.
Idle Timeout
Type the time in seconds that elapses before the router automatically disconnects from
the PPPoE server. 0 means no timeout.
PPTP Configuration
This section only appears if the interface uses a PPPoE or PPTP Internet connection.
