ZyXEL Communications UAG5100 User Manual Download Page 281

Page: 281 / 505

Chapter 27 Printer Manager

UAG5100 User’s Guide

281

Figure 195

System Status Example

The following table describes the labels in this report.

System Status

--------------------------------------

Item Description

--------------------------------------

SYST 02:02:35

WAST Link up

WLST Activate

FWVR 2.50(AACG.0)

BTVR 1.22

WAMA 00-90-0E-00-4A-29

LAMA 00-90-0E-00-4A-30

WAIP 10.21.2.267

LAIP 172.16.0.1

WLIP 10.59.1.1

DHSP 10.59.1.33

DHEP 10.59.1.254

--------------------------------------

CPUS 5%

MEMS 40%

DKST 5%

--------------------------------------

2012/04/12 17:10:22

---End---

Table 128

System Status

LABEL

DESCRIPTION

SYST

This field displays the time since the system was last restarted.

WAST

This field displays the WAN connection status.

WLST

This field displays the status of the UAG’s wireless LAN.

FWVR

This field displays the version of the firmware on the UAG.

BTVR

This field displays the version of the bootrom.

WAMA

This field displays the MAC address of the UAG on the WAN.

LAMA

This field displays the MAC address of the UAG on the LAN.

WAIP

This field displays the IP address of the WAN port on the UAG.

LAIP

This field displays the IP address of the LAN port on the UAG.

WLIP

This field displays the IP address of the wireless LAN interface on the UAG.

DHSP

This field displays the first of the continuous addresses in the IP address pool.

DHEP

This field displays the end of the continuous addresses in the IP address pool.

CPUS

This field displays the UAG’s recent CPU usage.

MEMS

This field displays the UAG’s recent memory usage.

DKST

This field displays what percentage of the UAG’s onboard flash memory is currently being
used.

Summary of Contents for UAG5100


























































































































































































































































































































































































































































































































Search results

Summary of Contents for UAG5100

Reviews:

Related manuals for UAG5100

Brands by name

Popular brands

ZyXEL Communications UAG5100, User Manual

Search results

Summary of Contents for UAG5100

Reviews:

Related manuals for UAG5100

Brands by name

Popular brands