Chapter 47 Log and Report
UAG Series User’s Guide
536
The following table describes the labels in this screen.
47.3 Log Settings Screens
The
Log
Settings
screens control log messages and alerts. A log message stores the information
for viewing or regular e-mailing later, and an alert is e-mailed immediately. Usually, alerts are used
for events that require more serious attention, such as system errors and attacks.
Table 255
Configuration > Log & Report > Email Daily Report
LABEL
DESCRIPTION
Enable Email
Daily Report
Select this to send reports by e-mail every day.
Mail Server
Type the name or IP address of the outgoing SMTP server.
Mail Server Port
Enter the same port number here as is on the mail server for mail traffic.
TLS Security
Select this option to use Transport Layer Security (TLS) if you want encrypted
communications between the mail server and the UAG.
Authenticate
Server
If you choose
TLS Security
, you may also select this to have the UAG authenticate the
mail server in the TLS handshake.
Mail Subject
Type the subject line for the outgoing e-mail. Select
Append system name
to add the
UAG’s system name to the subject. Select
Append date time
to add the UAG’s system
date and time to the subject.
Append
system name
Select
Append system name
to add the UAG’s system name to the subject.
Append date
time
Select
Append date time
to add the UAG’s system date and time to the subject.
Mail From
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Mail To
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name
This box is effective when you select the
SMTP Authentication
check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the
SMTP Authentication
check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Retype to
Confirm
Retype your new password for confirmation.
Send Report Now
Click this button to have the UAG send the daily e-mail report immediately.
Schedule
Time For Sending
Report
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour
notation.
Report Items
Select the information to include in the report.
Select
Reset counters after sending report successfully
if you only want to see
statistics for a 24 hour period.
Reset All
Counters
Click this to discard all report data and start all of the counters over at zero.
Apply
Click
Apply
to save your changes back to the UAG.
Reset
Click
Reset
to return the screen to its last-saved settings.
