Chapter 8 Licensing
UAG Series User’s Guide
132
The UAG needs a license for UTM (Unified Threat Management) functionality, such as application
patrol and content filtering - see
for details. You can purchase an iCard and
enter the license key from it, at www.myzyxel.com to have the UAG use UTM services. See below
the respective chapters in this guide for more information about UTM features.
Maximum Number of Managed APs
The UAG is initially configured to support up to one local AP (NOT available on the UAG5100) and 8
remote managed APs (such as the NWA5123-NI). You can increase this by subscribing to additional
licenses. As of this writing, each license upgrade allows an additional 8 remote managed APs while
the maximum number of remote managed APs a single UAG can support is 8 (UAG2100), 16
(UAG4100) or 32 (UAG5100).
8.2 Registration Screen
Click the link in this screen to register your UAG with myZyXEL.com. The UAG should already have
Internet access before you can register it. Click
Configuration > Licensing > Registration
in the
navigation panel to open the screen as shown next.
Figure 91
Configuration > Licensing > Registration
8.3 Service Screen
Use this screen to display the status of your service registrations. To activate or extend a standard
service subscription, purchase an iCard and enter the iCard’s PIN number (license key) at
myZyXEL.com. Click
Configuration > Licensing > Registration
>
Service
to open the screen as
shown next.
