Chapter 35 User/Group
UAG Series User’s Guide
411
The following table describes the labels in this screen.
35.5 MAC Address Screen
This screen shows the MAC addresses of wireless clients, which can be authenticated by their MAC
addresses using the local user database. Click
Configuration > Object > User/Group > MAC
Address
to open this screen.
Note: You need to configure an SSID security profile’s MAC authentication settings to
have the AP use the UAG’s local database to authenticate wireless clients by their
MAC addresses.
Figure 277
Configuration > Object > User/Group > MAC Address
Table 184
Web Configurator for Non-Admin Users
LABEL
DESCRIPTION
User-defined
lease time (max
... minutes)
Access users can specify a lease time shorter than or equal to the one that you specified.
The default value is the lease time that you specified.
Renew
Access users can click this button to reset the lease time, the amount of time remaining
before the UAG automatically logs them out. The UAG sets this amount of time according
to the
•
User-defined lease time
field in this screen
•
Lease time
field in the
User Add/Edit
•
Lease time
field in the
Setting > Edit
screen (see
Updating lease
time
automatically
This box appears if you checked the
Allow renewing lease time automatically
box in
the
Setting
.) Access users can select this check
box to reset the lease time automatically 30 seconds before it expires. Otherwise, access
users have to click the
Renew
button to reset the lease time.
Remaining time
before lease
timeout
This field displays the amount of lease time that remains, though the user might be able to
reset it.
Remaining time
before auth.
timeout
This field displays the amount of time that remains before the UAG automatically logs the
access user out, regardless of the lease time.
