ZyXEL Communications Prestige 782R, User Manual, Page: 46 / 166

Prestige 782R G.SHDSL Router
Internet Access 3-5
3.2.9 Configuring TCP/IP and DHCP Ethernet Setup
Procedure
Step 1.
Enable the IP routing in Menu 1 – General Setup . To edit Menu 1 , type 1 in the main menu
and press [ENTER] . Set the Route IP field to Yes by pressing [SPACE BAR] and then press
[ENTER] .
Step 2.
To edit Menu 3.2, select the menu option Ethernet Setup in the Main Menu. When Menu 3
appears, select the submenu option TCP/IP and DHCP Setup and press [ENTER] . The screen
now displays Menu 3.2 – TCP/IP and DHCP Ethernet Setup
,
as shown next
.
Figure 3-1 Menu 3.2 – TCP/IP and DHCP Ethernet Setup
The following table will show you how to configure the DHCP fields.
Table 3-1 DHCP Ethernet Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP Setup
DHCP This field enables/disables the DHCP server.
If set to Server , your Prestige will act as a DHCP server.
If set to None , the DHCP server will be disabled.
If set to Relay , the Prestige acts as a surrogate DHCP server and relays
requests and responses between the remote server and the clients.
None
Server
(default)
Relay
When set to Server , the following four items need to be set:
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup
DHCP= Server192
Client IP Pool Starting Address=.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= 1
Multicast= IGMP-v2
IP Policies=
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to toggle.
First address
in the IP Pool
Size of the IP
Pool
IP addresses
of the DNS
servers