ZyXEL Communications Prestige 782R, User Manual, Page: 129 / 166

Prestige 782R G.SHDSL Router
System Maintenance 10-15
Step 5.
Use the TFTP client to transfer files between the Prestige and the computer. The firmware
file name is
ras and for the configuration file, rom-0 (rom-zero, not capital o).
If you upload the firmware to the Prestige, it will reboot automatically when the file transfer is completed.
The Telnet connection must be active and the SMT in CI mode before and during
the TFTP transfer.
For details on TFTP commands (see following example), please consult the documentation of your TFTP
client program. For UNIX, use
get to transfer from the Prestige to the computer, put the other way around
and binary to set binary transfer mode.
With serial (Xmodem) transfer, the filenames on the PC are your choice. With many ftp and tftp clients,
they are as well as seen next.
ftp> put prestige.bin ras
This is a sample ftp session showing the transfer of the PC file prestige.bin to the Prestige.
ftp> get rom-0 prestige.cfg
This is a sample ftp session saving the current configuration to the PC file prestige.cfg .
Using the FTP Command from the DOS Prompt
Step 1. Launch the FTP client on your computer.
Step 1. Type open and the IP address of your Prestige.
Step 2. You may press [ENTER] when prompted for a username.
Step 3. Type root and your SMT password as requested. The default is 1234.
Step 4. Type bin to set transfer mode to binary.
Step 5. Use put to transfer files from the computer to the Prestige, e.g., put prestige.bin ras transfers
the firmware on your computer (prestige.bin) to the Prestige and renames it ras . Similarly put
prestige.rom rom transfers the configuration file on your computer (prestige.rom) to the
Prestige and renames it rom .