ZyXEL Communications Prestige 782R, User Manual, Page: 138 / 166

Prestige 782R G.SHDSL Router
11-4 IP Routing Policy Setup
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu
allows you to configure a policy rule.
Figure 11-3 IP Routing Policy
Table 11-2 IP Routing Policy
FIELD DESCRIPTION
Policy Set Name This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Active Press [SPACE BAR] to select Yes to activate the policy.
Criteria
IP Protocol
IP layer 4 protocol, e.g., UDP , TCP , ICMP , etc.
Type of Service Prioritize incoming network traffic by choosing from Don’t Care / Normal / Min
Delay / Max Thruput / Max Reliability .
Precedence
Precedence value of the incoming packet. Values are 0 to 7 or Don’t Care .
Packet Length Type the length of incoming packets (in bytes). The operators in the Len
Comp (next field) apply to packets of this length.
Len Comp Press [SPACE BAR] to choose from Equal / Not Equal / Less / Greater /
Less or Equal / Greater or Equal .
Source:
Menu 25.1.1 - IP Routing Policy
Policy Set Name= test
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Normal
Packet length= 40
Precedence = 0 Len Comp= N/A
Source:
addr start= 1.1.1.1
end= 1.1.1.1
port start= 20 end= 20
Destination:
addr start= 2.2.2.2
end= 2.2.2.2
port start= 20 end= 20
Action= Matched
Gateway addr = 192.168.1.1
Log= No
Type of Service= Max Thruput
Precedence = 0
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.