P314 Broadband Sharing Gateway with 4-Port Switch
Remote Node Setup
4-1
Chapter 4
Remote Node Setup
This chapter shows you how to configure a remote node.
A remote node is required for placing calls to a remote gateway. A remote node represents both the remote
gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up
Internet access, you are actually configuring a remote node. We will show you how to configure
Menu 11.1
Remote Node Profile, Menu 11.3 – Remote Node Network Layer Options
and
Menu 11.5 – Remote
Node Filter
.
4.1 Remote Node Profile
From the Main Menu, select menu option 11 to open
Menu 11.1 – Remote Node Profile
. There are two
variations of this menu depending on whether you choose
Ethernet
Encapsulation
or
PPPoE
Encapsulation.
4.1.1 Ethernet
Encapsulation
You must choose the
Ethernet
option when the WAN port is used as a regular Ethernet. The first Menu 11.1
screen you see is for
Ethernet
encapsulation shown next.
Figure 4-1
Menu 11.1 Remote Node Profile for Ethernet Encapsulation
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Route= IP
Active= Yes
Encapsulation= Ethernet
Edit IP= No
Service Type= Standard
Session Options:
Service Name= N/A
Edit Filter Sets= No
Outgoing=
My Login= N/A
My Password= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel:
