P314 Broadband Sharing Gateway with 4-Port Switch
Internet Access
3-5
Figure 3-2
Menu 3.2 – TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-1
LAN DHCP Setup Menu Fields
Field
Description
Example
DHCP=
This field enables/disables the DHCP server. If it is set to
Server
,
your Prestige will act as a DHCP server. If set to
None
, DHCP
service will be disabled and you must have another DHCP sever
on your LAN, or else the workstation must be manually
configured. When DHCP is set to
Server
, the following four items
need to be set.
None
Server
(default)
Client IP Pool
Starting Address
This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client IP Pool
This field specifies the size, or count, of the IP address pool.
32
Primary DNS
Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask. Leave these entries at 0.0.0.0 if they are provided
by a WAN DHCP server.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= IGMP-v2
Press ENTER to Confirm or ESC to CANCEL:
Press Space Bar to Toggle.
