P314 Broadband Sharing Gateway with 4-Port Switch
System Maintenance and Information
10-1
Chapter 10
System Maintenance & Information
This chapter leads you through SMT menus 24.8 to 24.9
and also discusses bootbase commands.
10.1 Command Interpreter Mode
This option allows you to enter command interpreter mode, a “DOS prompt” type command interface, which
allows more advanced system diagnosis and troubleshooting (beyond the scope of this guide). See our PNC
supporting disk or the ZyXEL web site at www.zyxel.com for more detailed information on CI commands.
Enter
8
from
Menu 24 – System Maintenance
. A list of valid commands can be found by typing [help] or
[?] at the command prompt. Type “exit” to return to the SMT main menu when finished.
Figure 10-1
Command Mode in Menu 24
Figure 10-2
Valid Commands
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Firmware Upload
8. Command Interpreter Mode
9. Call Control
Enter Menu Selection Number:
Copyright (c) 1994 - 2000 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
poe ip ppp hdap
ras>
