manualshive.com logo in svg

ZyXEL Communications Prestige 2602R Series, User Manual

Share
Download
ZyXEL Communications Prestige 2602R Series User Manual Download Page 37

Prestige 2602R Series User’s Guide

 Preface

37

Preface

Congratulations on your purchase of the Prestige 2602R Series ADSL VoIP IAD. 

Note: 

Register your product online to receive e-mail notices of firmware upgrades and 

information at 

www.zyxel.com

 for global products, or at 

www.us.zyxel.com

 for 

North American products.

Your Prestige is easy to install and configure. 

About This User's Guide

This manual is designed to guide you through the configuration of your Prestige for its various 
applications. The web configurator parts of this guide contain background information on 
features configurable by web configurator. The SMT parts of this guide contain background 
information solely on features not configurable by web configurator.

Note: 

Use the web configurator, System Management Terminal (SMT) or command 
interpreter interface to configure your Prestige. Not all features can be 
configured through all interfaces.

Related Documentation

• Supporting Disk

Refer to the included CD for support documents.

• Quick Start Guide 

The Quick Start Guide is designed to help you get up and running right away. They 
contain connection information and instructions on getting started.

• Web Configurator Online Help

Embedded web help for descriptions of individual screens and supplementary 
information.

• ZyXEL Glossary and Web Site

Please refer to www.zyxel.com for an online glossary of networking terms and additional 
support documentation.

User Guide Feedback 

Help us help you. E-mail all User Guide-related comments, questions or suggestions for 
improvement to [email protected] or send regular mail to The Technical Writing 
Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, 
Hsinchu, 300, Taiwan. Thank you.

Summary of Contents for Prestige 2602R Series



































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands