manualshive.com logo in svg

ZyXEL Communications Prestige 2602R Series, User Manual

Share
Download
ZyXEL Communications Prestige 2602R Series User Manual Download Page 217

Prestige 2602R Series User’s Guide

Chapter 19 Maintenance

217

19.3  DHCP Table Screen 

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige 
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP 
configuration for the clients. If set to 

None

, DHCP service will be disabled and you must have 

another DHCP server on your LAN, or else the computer must be manually configured.

Click 

Maintenance

, and then the 

DHCP Table

 tab. Read-only information here relates to 

your DHCP status. The DHCP table shows current DHCP Client information (including 

IP 

Address

, 

Host

 

Name

 and 

MAC Address

) of all network clients using the DHCP server.

TxPkts 

This field displays the number of packets transmitted on this port.

RxPkts 

This field displays the number of packets received on this port.

Errors

This field displays the number of error packets on this port. 

Tx B/s 

This field displays the number of bytes transmitted in the last second.

Rx B/s

This field displays the number of bytes received in the last second.

Up Time 

This field displays the elapsed time this port has been up. 

Collisions

This is the number of collisions on this port.

Voice Statistics

The voice statistics fields apply to calls currently being made or received on a 

telephone connected to one of the Prestige's phone ports. 

Phone

This field displays the Prestige's phone port number. 

Status

Status This field displays

 Onhook 

when the telephone handset is in it’s cradle 

and 

Offhook 

when telephone handset is out of it’s cradle.

TxPkts

This field displays a call's number of RTP (Real time Transport Protocol) packets 

that have been transmitted. RTP is used to handle voice data transfer. This field 

displays 0 again after the call ends.

RxPkts

This field displays a call's number of RTP packets received. This field displays 0 

again after the call ends. 

Tx B/s

This field displays a call's number of bytes of RTP traffic transmitted in the last 

second. This field displays 0 again after the call ends. 

Rx B/s

This field displays a call's number of bytes of RTP traffic received in the last 

second. This field displays 0 again after the call ends. 

Talk Time

This field displays a call's duration. This field displays 0 again after the call ends. 

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

Set Interval

Click this button to apply the new poll interval you entered in the 

Poll Interval

 

field above.

Stop

Click this button to halt the refreshing of the system statistics.

Table 66   

System Status: Show Statistics (continued)

LABEL

DESCRIPTION

Summary of Contents for Prestige 2602R Series



































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands