manualshive.com logo in svg

ZyXEL Communications Prestige 2602R Series, User Manual

Share
Download
ZyXEL Communications Prestige 2602R Series User Manual Download Page 304

Prestige 2602R Series User’s Guide

304 

Chapter 32 System Information and Diagnosis

The following table describes the fields present in 

Menu 24.1 —

 

System Maintenance —

 

Status

 which are read-only and meant for diagnostic purposes.

Figure 185   

Menu 24.1 System Maintenance : Status

The following table describes the fields present in 

Menu 24.1 —

 

System Maintenance —

 

Status

.

Menu 24.1 - System Maintenance - Status           00:36:37

                                                             Sat. Jan. 01, 2000
Node-Lnk Status      TxPkts      RxPkts      Errors  Tx B/s  Rx B/s     Up 
Time
 1-PPPoA N/A              0           0           0       0       0     0:00:00
 2       N/A              0           0           0       0       0     0:00:00
 3       N/A              0           0           0       0       0     0:00:00
 4       N/A              0           0           0       0       0     0:00:00
 5       N/A              0           0           0       0       0     0:00:00
 6       N/A              0           0           0       0       0     0:00:00
 7       N/A              0           0           0       0       0     0:00:00
My WAN IP (from ISP): 0.0.0.0
    Ethernet:                                    WAN:
      Status:                  Tx Pkts: 528        Line Status: Down
      Collisions: 0            Rx Pkts: 505        Upstream Speed:     0 kbps
    CPU Load =    2.12%                            Downstream Speed:     0 kbps

       Press Command:
COMMANDS: 1-Reset Counters  ESC-Exit

Table 102   

Menu 24.1 System Maintenance: Status 

FIELD

DESCRIPTION

Node-Lnk

This is the node index number and link type. Link types are: PPP, ENET, 1483.

Status

This shows the status of the remote node.

TxPkts

The number of transmitted packets to this remote node.

RxPkts

The number of received packets from this remote node.

Errors

The number of error packets on this connection.

Tx B/s

This shows the transmission rate in bytes per second.

Rx B/s

This shows the receiving rate in bytes per second.

Up Time

This is the time this channel has been connected to the current remote node.

My WAN IP 

(from ISP)

This is the IP address of the ISP remote node.

Ethernet

This shows statistics for the LAN.

   Status

This shows the current status of the LAN.

   Tx Pkts

This is the number of transmitted packets to the LAN.

   Rx Pkts

This is the number of received packets from the LAN.

   Collision

This is the number of collisions.

WAN

This shows statistics for the WAN.

Summary of Contents for Prestige 2602R Series



































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands