ZyXEL Communications PRESTIGE 2000W V2 User Manual Download Page 99

Page: 99 / 131

P-2000W_V2 User’s Guide

Chapter 13 Administrator Web Configurator Screens

Click

SIP

to open the following screen where you can set up your Prestige to connect to the

SIP server.

Note:

Enter either the IP address of your SIP server or the URL domain name as
given to you by your VoIP service provider.

Figure 33

SIP Configuration

Table 19

SIP Configuration

LABEL

DESCRIPTION

SIP Proxy

SIP URI

Type the SIP telephone number assigned to your Prestige by your VoIP service

provider.

SIP Server Address

Type the IP address or domain name of the SIP server in this field. It doesn’t

matter whether the SIP server is a proxy, redirect or register server. You can

use up to 95 ASCII characters.

SIP Server Port

Enter the SIP server’s listening port for SIP in this field. Leave this field set to

the default if your VoIP service provider did not give you a server port number

for SIP.

Summary of Contents for PRESTIGE 2000W V2




































































































































Search results

Summary of Contents for PRESTIGE 2000W V2

Reviews:

Related manuals for PRESTIGE 2000W V2

Brands by name

Popular brands

ZyXEL Communications PRESTIGE 2000W V2, User Manual

Search results

Summary of Contents for PRESTIGE 2000W V2

Reviews:

Related manuals for PRESTIGE 2000W V2

Brands by name

Popular brands