ZyXEL Communications PRESTIGE 2000W V2, User Manual

Page: 69 / 131

P-2000W_V2 User’s Guide
Chapter 11 Using the Web Configurator Screens 69
C
H A P T E R
11
Using the Web Configurator
Screens
This chapter describes how to use the Prestige’s web configurator to view and configure the
Prestige’s settings.
11.1 Introduction to the Web Configurator
The embedded web configurator allows you to configure or view the Prestige’s settings
through Microsoft Internet Explorer. Use Internet Explorer 6.0 and later versions.
It is recommended that you set your screen resolution to 1024 by 768 pixels.
11.2 Accounts
The Prestige has two pre-configured accounts to access the web configurator. The first is the
user account that lets you configure the Prestige’s basic settings. The second is an
administrator’s account that allows you to alter the way the Prestige makes and receives calls,
for example selecting a voice codec.
Note: Do not attempt to change the administrator settings unless you understand
what you are doing. These settings affect the way your Prestige makes and
receives calls and are already configured for best performance.
11.2.1 Login
1 Make sure your Prestige is connected to the wireless LAN and record its IP address (you
can use the
Information menu to check your phone’s IP address).
2 Launch your web browser.
3 Type "http://<IP address>" as the URL (where “IP address” is the Prestige’s IP address).
Figure 8 Browser Address
4 Enter your user name and password and click OK to login.