ZyXEL Communications P-660H Series User Manual Download

Page: 426 / 466

P-660H/HW-T Series User’ Guide

425

Appendix L

Database method failed.

Path was not verified.

Maximum path length reached.

Table 158

802.1X Logs

LOG MESSAGE

DESCRIPTION

Local User Database accepts
user.

A user was authenticated by the local user database.

Local User Database reports user
credential error.

A user was not authenticated by the local user database

because of an incorrect user password.

Local User Database does not
find user`s credential.

A user was not authenticated by the local user database

because the user is not listed in the local user database.

RADIUS accepts user.

A user was authenticated by the RADIUS Server.

RADIUS rejects user. Pls check
RADIUS Server.

A user was not authenticated by the RADIUS Server.

Please check the RADIUS Server.

Local User Database does not
support authentication method.

The local user database only supports the EAP-MD5

method. A user tried to use another authentication

method and was not authenticated.

User logout because of session
timeout expired.

The router logged out a user whose session expired.

User logout because of user
deassociation.

The router logged out a user who ended the session.

User logout because of no
authentication response from
user.

The router logged out a user from which there was no

authentication response.

User logout because of idle
timeout expired.

The router logged out a user whose idle timeout period

expired.

User logout because of user
request.

A user logged out.

Local User Database does not
support authentication mothed.

A user tried to use an authentication method that the local

user database does not support (it only supports EAP-

MD5).

No response from RADIUS. Pls
check RADIUS Server.

There is no response message from the RADIUS server,

please check the RADIUS server.

Use Local User Database to
authenticate user.

The local user database is operating as the

authentication server.

Use RADIUS to authenticate user.

The RADIUS server is operating as the authentication

server.

No Server to authenticate user.

There is no authentication server to authenticate a user.

Local User Database does not
find user`s credential.

A user was not authenticated by the local user database

because the user is not listed in the local user database.

Table 157

Certificate Path Verification Failure Reason Codes (continued)

CODE

DESCRIPTION

Summary of Contents for P-660H Series



















































































































































































































































































































































































































































































Search results

Summary of Contents for P-660H Series

Reviews:

Related manuals for P-660H Series

Brands by name

Popular brands

ZyXEL Communications P-660H Series, User Manual

Search results

Summary of Contents for P-660H Series

Reviews:

Related manuals for P-660H Series

Brands by name

Popular brands