manualshive.com logo in svg

ZyXEL Communications P-660H Series, User Manual

Share
Download
ZyXEL Communications P-660H Series User Manual Download Page 177

P-660H/HW-T Series User’ Guide

Chapter 15 Logs Screens

176

C

H A P T E R

15

Logs Screens

This chapter contains information about configuring general log settings and viewing the 
Prestige’s logs. Refer to the appendix for example log message explanations.

15.1  Logs Overview 

The web configurator allows you to choose which categories of events and/or alerts to have 
the Prestige log and then display the logs or have the Prestige send them to an administrator 
(as e-mail) or to a syslog server. 

15.1.1  Alerts and Logs

An alert is a type of log that warrants more serious attention. They include system errors, 
attacks (access control) and attempted access to blocked web sites. Some categories such as 

System Errors

 consist of both logs and alerts. You may differentiate them by their color in the 

View Log 

screen. Alerts display in red and logs display in black.

15.2  Configuring Log Settings 

Use the 

Log

 

Settings 

screen to configure to where the Prestige is to send logs; the schedule for 

when the Prestige is to send the logs and which logs and/or immediate alerts the Prestige is to 
record. See 

Section 15.1 on page 176

 for more information. 

To change your Prestige’s log settings, click 

Logs

, then the 

Log Settings

. The screen appears 

as shown.

Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full. 
Selecting many alert and/or log categories (especially 

Access Control

) may result in many e-

mails being sent.

Summary of Contents for P-660H Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands