Omni 56K USB Lite
Command Sets
5-9
COMMAND
OPTIONS
FUNCTION AND DESCRIPTION
REF.
Modem error control negotiation:
S21.0
*E0 *
If error control negotiation fails, keep the non-error
control connection.
*En
*E1
If error control negotiation fails, disconnect the call (hang-
up).
*Pn
n=0 to 15
*P9 *
Set transmission power level; ranges from -8 dBm to -15
dBm (default: -11 dBm).
S17.1-4
Action taken when line quality changes:
S27.6-7
*Q0
No action to poor signal quality.
*Q1
Retrain action taken if signal quality is poor (see also
S41.2).
*Q2 *
Adaptive rate, automatic fall-back or forward.
*Qn
*Q3
Disconnect if signal quality is poor.
*T
Recall the last CND (Caller ID) information.
S40.2
5.1.4 Extended AT# Command Sets
Table 5-5 Extended AT# Command Sets
COMMAND
OPTIONS
FUNCTION AND DESCRIPTION
REF.
#En
Modem status in escape state:
#E0
Disable the report of modem status in escape state.
#E1
Enable the report of modem status in escape state.
5.2 Fax Command Sets
5.2.1 Service Class 1 Commands
