Omni 56K USB Lite
4-4
Result Codes
If error control result codes are enabled (X4, X5, X6, X7), the resulting message is
formatted as the following:
X4:
CARRIER
Rx Rate.
PROTOCOL
: Error Control Level
COMPRESSION
: Compression Level
CONNECT
DTE Speed
X5:
CONNECT
DTE Speed/Protocol Rx Rate/Error Control Level
X6:
CONNECT
Rx Rate/ARQ
X7:
CONNECT
Rx Rate/ARQ/Error Control Level
Where ARQ denotes that Automatic Retransmission reQuest type of error control is enabled.