ZyXEL Communications OMNI 56K USB MODEM User Manual Download

Page: 50 / 102

Omni 56K USB Lite

5-4

Command Sets

COMMAND

OPTIONS

FUNCTION AND DESCRIPTION

REF.

n=0-2

Reset modem and set power-on profile.

S15.5-7

Reset modem and load user profile n (0-1).

Reset modem and load factory settings.

+++

Escape sequence code, entered in data state, wait for modem
to return to command state.

5.1.2 Extended AT& Command Sets

Table 5-3 Extended AT& Command Set

COMMAND

OPTIONS

FUNCTION AND DESCRIPTION

REF.

Carrier Detect (CD) options:

S21.4

&C0

CD always ON (See also S42.7).

&Cn

&C1 *

CD tracks presence of carrier (See also S38.3, S42.7).

Data Terminal Ready (DTR) options. (See also S25):

S21.6-7

&D0

Ignore DTR signal, assume DTR is always ON.

&D1

108.1, DTR OFF-ON transition causes dial of the default
number. (See also 'AT*Dn' and S48.4).

&D2 *

108.2, Data Terminal Ready, DTR OFF causes the
modem to hang up.

&Dn

&D3

Same as &D2 but DTR OFF causes the modem to hang
up and reset from profile 0.

Load factory settings to RAM as active configuration.

Guard tone options:

S28.4-5

&G0 *

No guard tone (within USA, Canada).

&Gn

&G2

1800 Hz guard tone.

Summary of Contents for OMNI 56K USB MODEM







































































































Search results

Summary of Contents for OMNI 56K USB MODEM

Reviews:

Related manuals for OMNI 56K USB MODEM

Brands by name

Popular brands

ZyXEL Communications OMNI 56K USB MODEM, User Manual

Search results

Summary of Contents for OMNI 56K USB MODEM

Reviews:

Related manuals for OMNI 56K USB MODEM

Brands by name

Popular brands