Omni 56K USB Lite
B
TCP/IP
•
· If you have a static IP address, select
Specify an IP address
and type your information into the
IP
Address
and
Subnet Mask
fields.
3.
Click the
DNS Configuration
tab.
•
If you do not know your DNS information, select
Disable DNS
.
•
If you know your DNS information, select
Enable DNS
and type the information in the fields below
(you may not need to fill them all in).
4.
Click the
Gateway
tab.
•
If you were not given a gateway IP address, remove previously installed gateways.
•
If you have a gateway IP address, type it in the
New gateway
field and click
Add
.
5.
Click
OK
to save and close the
TCP/IP Properties
window.
6.
Click
OK
to close the
Network
window. Insert the Windows CD if prompted.
7.
Turn on your Prestige and restart your computer when prompted.
Verifying TCP/IP Properties
1.
Click
Start
and then
Run
.
2.
In the
Run
window, type "winipcfg" and then click
OK
to open the
IP Configuration
window.
3.
Select your network adapter. You should see your computer's IP address, subnet mask and default
gateway.
Setting up Your Windows NT/2000 Computer
Configuring TCP/IP
1.
Click
Start
,
Settings
,
Network and Dial-up Connections
and right-click
Local Area Connection
or
the connection you want to configure and click
Properties
.
2.
Select
Internet Protocol (TCP/IP)
(you may need to scroll down) and click
Properties
.
3.
The
Internet Protocol TCP/IP Properties
window opens.
•
If your IP address is dynamic, click
Obtain an IP address automatically
.
•
If you have a static IP address click
Use the following IP Address
and fill in the
IP address
,
Subnet
mask
, and
Default gateway
fields.
4.
In the
Internet Protocol TCP/IP
Properties window:
•
Click
Obtain DNS server automatically
if you do not know your DNS server IP address(es).
