Omni 56K USB Lite
Command Sets
5-3
COMMAND
OPTIONS
FUNCTION AND DESCRIPTION
REF.
Ln
n=0 to 3
2 *
Speaker volume control. The higher the value, the higher the
volume.
S24.4-6
Speaker control:
S21.1-2
M0
Speaker is always OFF.
M1 *
Speaker is ON until carrier is detected.
M2
Speaker is always ON.
Mn
M3
Speaker is ON after the last digit is dialed out. Tone dialing is
not heard.
O
Return to online state.
O1
Force modem to request a retrain.
Result code displayed:
S23.7
Q0 *
Modem returns result code.
Q1
Modem does not return result code.
Qn
Q2
Modem returns result code but quiet after answering on a
RING. (see also S42.2)
S40.1
Sr.b=n
Set bit 'b' of S-register 'r' to value 'n'. 'n' is a binary digit '0' or
'1'.
Sr.b?
Display value of bit 'b' of S-register 'r'.
Sr=n
Set S-register 'r' to value 'n'. 'n' must be a decimal number
between 0 and 255.
Sr?
Display value stored in S-register 'r'.
T
Tone dial.
S23.1
Sets display type for Result Codes:
S23.6
V0
Display result code in numeric form. (See also S35.7 and the
result code table of 'ATXn'.)
Vn
V1 *
Display result code in verbose form.
Xn
n=0-7
5 *
Result code options, see the Options Table.
S23.3-5
