ZyXEL Communications NETATLAS ENTERPRISE - User Manual Download Page 51

Page: 51 / 197

NetAtlas Enterprise Ethernet Switch Manager User’s Guide

Chapter 5 View

Table 16

Status: Hardware Status

LABEL

DESCRIPTION

Fan RPM (RPM) A properly functioning fan is an essential component (along with a sufficiently

ventilated, cool operating environment) in order for the device to stay within the

temperature threshold. Each fan has a sensor that is capable of detecting and

reporting if the fan speed falls below the threshold shown.

Index

This field displays the fan number.

Current

This field displays this fan’s current speed in Revolutions Per Minute (RPM).

Max

This field displays this fan’s maximum speed recorded in Revolutions Per Minute

(RPM).

Min

This field displays this fan’s minimum speed recorded in Revolutions Per Minute

(RPM).

Threshold

This field displays the minimum speed at which a normal fan should work.

Status

NORMAL

indicates that this fan is functioning above the minimum speed.

ERROR

indicates that this fan is functioning below the minimum speed.

Voltage (V)

The power supply for each voltage has a sensor that is capable of detecting and

reporting if the voltage falls out of the tolerance range.

Index

This field displays the first voltage sensor number.

Current

This is the current voltage reading in volts.

Max

This field displays the maximum voltage recorded at this sensor in volts.

Min

This field displays the minimum voltage recorded at this sensor in volts.

Threshold

This field displays the minimum voltage percentage at which the switch should work.

Status

NORMAL

indicates that the voltage is within an acceptable operating range at this

point; otherwise

ERROR

is displayed.

ABSENT

indicates that there is no power

reading at a sensor(s).

Temperature

The switch has temperature sensors that are capable of detecting and reporting if the

temperature rises above the threshold. You may choose the temperature unit (in

degrees Celsius or Fahrenheit).

Celsius

Select this option to display the temperature in degrees Centigrade.

Fahrenheit

Select this option to display the temperature in degrees Fahrenheit.

Index

This field displays the temperature sensor number.

Current

Value

This shows the current temperature at this sensor.

Max

This field displays the maximum temperature recorded at this sensor.

Min

This field displays the minimum temperature recorded at this sensor.

Threshold

This field displays the upper temperature limit at this sensor.

Status

This field displays

NORMAL

for temperatures below the threshold and

ERROR

for

those above.

Polling

The text box displays how often (in seconds) this screen refreshes. You may change

the refresh interval by typing a new number in the text box and then clicking the

Apply

button.

Click

Close

to close the screen.

Summary of Contents for NETATLAS ENTERPRISE -






































































































































































































Search results

Summary of Contents for NETATLAS ENTERPRISE -

Reviews:

Related manuals for NETATLAS ENTERPRISE -

Brands by name

Popular brands

ZyXEL Communications NETATLAS ENTERPRISE -, User Manual

Search results

Summary of Contents for NETATLAS ENTERPRISE -

Reviews:

Related manuals for NETATLAS ENTERPRISE -

Brands by name

Popular brands