manualshive.com logo in svg

ZyXEL Communications NETATLAS ENTERPRISE -, User Manual, Page: 22 / 197

Share
Download
ZyXEL Communications NETATLAS ENTERPRISE - User Manual Download Page 22

NetAtlas Enterprise Ethernet Switch Manager User’s Guide

 Preface

22

Preface

Congratulations on your purchase of the NetAtlas Enterprise Ethernet Switch Manager for the 
supported ZyXEL Ethernet switches. The Ethernet Switch Manager is an Element 
Management System (EMS) that retrieves management information from switches using 
SNMP.

Note: 

Register your product online to receive e-mail notices of firmware upgrades and 

information at www.zyxel.com for global products, or at www.us.zyxel.com for 
North American products.

About This User's Guide

This manual is designed to guide you through the configuration of your EMS for its 
applications. 

Syntax Conventions

• “Enter” means for you to type one or more characters. “Select” or “Choose” means for 

you to use one of the predefined choices.

• The SMT menu titles and labels are in 

Bold Times New Roman

 font. Predefined field 

choices are in 

Bold Arial

 font. Command and arrow keys are enclosed in square 

brackets

. [ENTER]

 means the Enter, or carriage return key; 

[ESC]

 means the Escape key 

and 

[SPACE BAR]

 means the Space Bar.

• Mouse action sequences are denoted using an angle bracket “>”. For example, “click the 

Apple icon, 

Control Panels 

and then 

Modem

” means first click the Apple icon, then 

point your mouse pointer to 

Control Panels

 and then click 

Modem

.

• For brevity’s sake, we will use “e.g.,” as a shorthand for “for instance”, and “i.e.,” for 

“that is” or “in other words” throughout this manual.

• The NetAtlas Enterprise Ethernet Switch Manager may be referred to as” the EMS” in 

this User’s guide.

• Unless otherwise specified, the supported ZyXEL Ethernet switches being managed by 

the EMS will be referred to as “the switch” or “the device” in this User’s Guide. 

Related Documentation

• Supporting Disk

Refer to the included CD for support documents.

• Switch User’s Guide

Refer to your switch User’s Guide for directions on installation, connections, 
maintenance, hardware troubleshooting and safety warnings.

• ZyXEL Glossary and Web Site

Please refer to www.zyxel.com for an online glossary of networking terms and additional 
support documentation.

Summary of Contents for NETATLAS ENTERPRISE -






































































































































































































Reviews:

No comments