manualshive.com logo in svg

ZyXEL Communications NETATLAS ENTERPRISE -, User Manual, Page: 46 / 197

Share
Download
ZyXEL Communications NETATLAS ENTERPRISE - User Manual Download Page 46

NetAtlas Enterprise Ethernet Switch Manager User’s Guide

Chapter 4 Map

46

C

H A P T E R

 4

Map

This chapter describes the Map screens you use to add, edit or delete device mappings in the 
EMS.

4.1  Submap and Device Mapping

The EMS mapping displays logical hierarchy for the switch in the EMS. When you first start 
the EMS, the default Root Map and an icon for your switch device are created in the Device 
List Panel automatically. Both devices and submaps (or folders) can be added below the 
rootmap. Devices can also be added to submap folders.

The following figure shows the “Rootmap” folder. The managed devices are mapped to the 
“Rootmap” folder. 

Figure 16   

Submaps and Device Mapping

Note: 

You cannot create, edit or delete the Rootmap. 

4.1.1  Adding a Submap or Device

To add a new submap or a new device, select the Root Map or a submap icon in the Device 
List Panel. 

Click 

Map

 > 

Add Submap/Device

 to display the following screen.

Summary of Contents for NETATLAS ENTERPRISE -






































































































































































































Reviews:

No comments