ZyXEL Communications NETATLAS ENTERPRISE -, User Manual, Page: 129 / 197

NetAtlas Enterprise Ethernet Switch Manager User’s Guide
129 Chapter 14 Switch Configuration
Figure 85 Switch Configuration: Filtering: Add
The following table describes the related labels in this screen.
14.7 MAC Forwarding
A static MAC address entry is an address that has been manually entered in the MAC address
learning table. Static MAC addresses do not age out. When you set up static MAC address
rules, you are setting static MAC addresses for a port. Devices that match static MAC address
rules on a port can only receive traffic on that port and cannot receive traffic on other ports.
This may reduce unicast flooding.
1
In the Device Panel list, select a device and then right-click.
2 Click Configuration > Switch Configuration > MAC Forwarding to display the
following screen.
Table 61 Switch Configuration: Filtering: Add
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
Action If the options are not applicable, packets that match the MAC address and VLAN ID
specified will be discarded.
Select
Discard source to drop frame from the source MAC address (specified in the
MAC field). The switch can still send frames to the MAC address.
Select Discard destination to drop frames intended for the destination MAC address
(specified in the MAC field). The switch can still receive frames originating from the
MAC address.
Select
Discard source and Discard destination to block traffic to/from the MAC
address specified in the MAC field.
MAC Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
VID Type the VLAN group identification number.
OK Click OK to save the changes and close this screen.
Close Click Close to close this screen. All unsaved settings will be lost.