ZyXEL Communications NBG-415N, User Manual

Page: 50 / 155

ZyXEL NBG-415N User’s Guide
Chapter 4 WAN 50
Figure 35 Basic: WAN: L2TP
The following table describes the related fields in this screen.
Table 17 Basic: WAN: L2TP
LABEL DESCRIPTION
MODES
WAN Select L2TP if your ISP gives you Internet access account information (such as
the username and password).
L2TP WAN MODE
Address Mode Select Dynamic IP If your ISP did not assign you a fixed IP address. This is the
default selection.
Select
Static IP If your ISP assigned a fixed IP address. The set the following
fields.
L2TP IP Address This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
L2TP Subnet Mask This field is applicable if you select Static IP in the Address Mode field.
Enter the subnet mask for the IP address.
L2TP Gateway IP
Address
This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address of the router through which this WAN connection will send
traffic (the default gateway).