ZyXEL Communications NBG-415N User Manual Download

Page: 111 / 155

ZyXEL NBG-415N User’s Guide

111

Chapter 8 Tools

8.4.3 Reset Configuration

Note:

When you reset the device, all custom changes will be lost.

Follow the steps below to reset your ZyXEL Device.

In the web configurator, click

Tools > System

and click

Restore all Settings to the

Factory Defaults

A screen displays. Click

to continue.

Figure 79

Tools: System: Reset

Wait until the ZyXEL Device finishes rebooting before accessing the web configurator.

8.4.4 Rebooting Your ZyXEL Device

Note:

When you reboot the device, all unsaved changes will be lost.

Follow the steps below to restart your ZyXEL Device.

In the web configurator, click

Tools > System

and click

Reboot the Device

A screen displays. Click

to continue.

Figure 80

Tools: System: Reboot the Device

Wait until the ZyXEL Device finishes rebooting before accessing the web configurator.

8.5 Firmware

Use the Firmware screen to update the firmware on your ZyXEL Device.

Back up the current device configuration in the

System

screen.

Download the latest firmware file from

www.zyxel.com.

In the web configurator, click

Tools > Firmware

Summary of Contents for NBG-415N




























































































































































Search results

Summary of Contents for NBG-415N

Reviews:

Related manuals for NBG-415N

Brands by name

Popular brands

ZyXEL Communications NBG-415N, User Manual

Search results

Summary of Contents for NBG-415N

Reviews:

Related manuals for NBG-415N

Brands by name

Popular brands