ZyXEL Communications NBG-415N, User Manual

Page: 65 / 155

ZyXEL NBG-415N User’s Guide
65 Chapter 6 WLAN
The following table describes the related labels in this screen.
6.2.3 WLAN Security Setup: WPA-Enterprise
If you want better WLAN security than WEP and have a RADIUS server on your network,
select
WPA-Enterprise in the Security Mode field in the Wireless screen.
Table 24 Basic: WLAN Security Setup: WPA-Personal
LABEL DESCRIPTION
WPA
WPA Mode Specify a WPA mode. Make sure the peer device(s) is also set to use the same
WPA mode.
Select
Auto (WPA or WPA2) to set the ZyXEL Device to use WPA2 first and then
WPA if connection fails with WPA2.
Select
WPA Only to set the ZyXEL Device to use WPA. WPA is a older
implementation than WPA2.
Select
WPA2 Only to set the ZyXEL Device to use WPA2 only.
Group Key Update
Interval
This is the rate at which an AP or RADIUS server sends a new group key out to all
clients. The re-keying process is the WPA equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis.
Enter an update time in seconds.
PRE SHARED KEY
Pre-Shared Key Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).