Chapter 7 Wireless LAN
LTE5366 Series User’s Guide
81
7.7 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click
Configuration > Network
>
Wireless LAN
>
QoS
. The following screen appears.
Figure 46
Configuration > Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Tx Power
Set the output power of the LTE5366 in this field. If there is a high density of APs in an area,
decrease the output power of the LTE5366 to reduce interference with other APs. Select one
of the following
100%
,
90%
,
75%
,
50%
,
25%
or
10%
.
Beacon Interval
When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This
specifies the time period before the device sends the beacon again. The interval tells
receiving devices on the network how long they can wait in low-power mode before waking
up to handle the beacon. A high value helps save current consumption of the access point.
Apply
Click
Apply
to save your changes back to the LTE5366.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 27 Configuration > Network > Wireless LAN > Advanced (continued)
LABEL
DESCRIPTION
Table 28 Configuration > Network > Wireless LAN > QoS
LABEL
DESCRIPTION
WMM QoS (2.4G)
Select
Enable
to have the LTE5366 automatically give a service a priority level according
to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
This field is not configurable and the LTE5366 automatically enables WMM QoS if you
select
802.11n
,
802.11g/n Mixed,
or
802.11b/g/n Mixed
in the
Wireless LAN > General
screen.
WMM QoS (5G)
Select
Enable
to have the LTE5366 automatically give a service a priority level according
to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
This field is not configurable and the LTE5366 automatically enables WMM QoS if you
select
802.11n
,
802.11a/n Mixed,
or
802.11a/n/ac Mixed
in the
Wireless LAN > General
screen.
Apply
Click
Apply
to save your changes to the LTE5366.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
