Chapter 21 Bandwidth Management
LTE5366 Series User’s Guide
147
21.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN)
must be less than or equal to the upstream bandwidth that you configure in the
Bandwidth
Management
> General
screen (
).
The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN) must
be less than or equal to the downstream bandwidth that you configure in the
Bandwidth Management
> General
).
21.4 General Screen
Use this screen to have the LTE5366 apply bandwidth management.
Click
Configuration > Management
> Bandwidth MGMT
to open the bandwidth management
General
screen.
Figure 93
Configuration > Management > Bandwidth Management > General
The following table describes the labels in this screen.
Table 64 Configuration > Management > Bandwidth Management > General
LABEL
DESCRIPTION
Bandwidth
Management
This field allows you to have LTE5366 apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule priority over
traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or minimum
amounts of bandwidth that can be used by traffic that matches a bandwidth rule.
Bandwidth of
Upstream
Specify the total amount of bandwidth that you want to dedicate to uplink traffic. The
recommendation is to set this to match the actual upstream data rate.
This is traffic from LAN/WLAN to WAN.
Bandwidth of
Downstream
Specify the total amount of bandwidth that you want to dedicate to downlink traffic. The
recommendation is to set this to match the actual downstream data rate.
This is traffic from WAN to LAN/WLAN.
